Custom Built Contour Heel Cutaway

Home > Guitar Products > Standard LazrArt Designs > Custom Built Contour Heel Cutaway

Your Price:$24.95

Part Number:GCB_CONTOUR

Left Screw Hole Measurements

They are 1 inch apart

Must be 1.125 inch apart

Doesn't matter

*Plate/Engraving

Serial Number

Random Number

Leave Blank

Use Custom Number (entered below)

Custom Serial Number

Enter the Custom Serial Number to engrave:

Comments

Notes to Seller about layout, etc.:

Quantity

Quantity

Price

About the Design	This is the proprietary LazrArt "Custom Built" logo
About the plates	These neck plates are designed to the Fender standard, the plates are 2" x 2.5" with holes on center at 1"left, 2" right and 1.5" across. NOTE: Some guitars use neck plates whose left screw holes are 1.125" apart - this neck plate will not fit.
About the engraving	Using the newest Laser Engraving technology, the plate is etched a fraction of an inch. Steel/alloy plates show rich brown engraving. Laser marking is permanent and easily visible. *LaserBlack Darkening is a manual 4-step process that changes the natural brown engraving to a black color
Screws	You will receive 4 matching screws.