Custom Micro Tilt Contour

Home > Guitar Products > Micro Tilt Neck Plates > Custom Micro Tilt Contour

Your Price:$24.95

Part Number:GMT_CUST_CUT

Left Screw Holes are 1-inch apart?

Yes, proceed

No, do NOT order

*Plate/Engraving

Upload Image

Upload Design to be engraved:

Text Only

If you only want text - not a graphic design:

Comments

Notes to Seller about layout, etc.:

Quantity

Quantity

Price

About the Design	You supply the design
About the plates	These neck plates are designed to the Fender standard, the plates are 2" x 2.5" with holes on center at 1" left, 2" right and 1.5" across. NOTE: Some guitars use neck plates whose left screw holes are 1.125" apart - this neck plate will not fit. A 5mm hole is centered at the bottom of the neck plate, providing access to the Micro Tilt adjustment without removing the plate.
About the engraving	Using the newest Laser Engraving technology, the plate is etched a fraction of an inch. Steel/alloy plates show rich brown engraving. Laser marking is permanent and easily visible. *LaserBlack Darkening is a manual 4-step process that changes the natural brown engraving to a black color
Gasket & Screws	You will receive 4 matching screws.